When fitted with a refractor dome, this lantern will give the usual Group B lighting characteristics. When used without a refractor, a more general light distribution will result.

SPECIFICATION

An attractive modern style lantern which is durable, strong and lightweight. The top is hinged and gasketted to the clear perspex bowl, and secured by two toggle clips. The base can be supplied to fit the majority of standard spigots; it is cast in corrosion resistant aluminium alloy (LM6). This base is fitted with a porcelain connector block, earth screw, cable clamp and supports the lampholder. Where required, a refractor dome is fitted. Standard finish is stove enemelled white inside and aluminium outside. Other colours in the I.C.I. range can be supplied to special order. AN OUTSTANDING FEATURE OF THE PERSPEX BOWL IS ITS SINGLE PIECE, DEEP DRAWN CONSTRUCTION. THE ABSENCE OF SEAMS OR JOINTS GIVES MAXIMUM STRENGTH AND RIGIDITY.

FIXING

The lantern is supplied with spigot cap, either B.S. 3" x 3", or to suit the ELECOSLIM column. Location is by Allen screws.

CATALOGUE NUMBER	SPIGOT	REFRACTOR	LAMPHOLDER
HW 828	3" x 3"	WITH OR WITHOUT	100/200W GLS 80/125W MB/U 80/125W MBF/U
HW 880	ELECOSLIM	WITH OR WITHOUT	100/200W GLS 80/125W MB/U 80/125W MBF/U
PLEASE STATE TYPE OF LAMPHOLDER WHEN ORDERING

THE 'ELECO-WAY' POST TOP

ISOCANDLE DIAGRAM

Test No. C45

BASED ON INITIAL OUTPUT FROM 100 WATT T.F. LAMP.

ELECO PHOTOMETIC LABORATORY

	ELECO LIMITED Sphere Works · St. Albans · Hertfordshire Telephone: ST. ALBANS 54524/8 Telegrams: VOLTARCON ST. ALBANS