new
manufacturers
installations
collection
restorations
timeline
identification
publications
glossary
mailing list
site map
links
about
contact



PERFORMANCE

A general all-round illumination is obtained with a pleasing appearance and absence of glare.



SPECIFICATION

Another very modern and pleasing Post Top design, similar to the ELECO-Way, but with greater height and having a smaller diameter opalised perspex bowl without curved sides and with a smaller diameter top canopy. The lantern top is gasketted to the diffusing opal perspex bowl, and secured by toggle clips. The base is cast in corrosion resistant aluminium alloy (LM6). This base is fitted with a porcelain connector block, earth screw, cable clamp, and also supports the lampholder. Standard finish is stove enemelled white inside and aluminium outside. Other colours in the I.C.I. range can be supplied to special order. A choice of two grades of opalescence is available, either 030 or 040. Refractors are not fitted as standard in this type of lantern, which is designed to be as simple and functional as possible, but if especially required, a refracor can be supplied with the 030 opalescent bowl. AN OUTSTANDING FEATURE OF THE PERSPEX BOWL IS ITS SINGLE PIECE, DEEP DRAWN CONSTRUCTION. THE ABSENCE OF SEAMS OR JOINTS GIVES MAXIMUM STRENGTH AND RIGIDITY.



FIXING

The lantern is supplied with spigot cap suitable for 1¼" B.S.P plain. 3 3/8" maximum length. Location is by Allen screws.



Catalogue
Number
Bowl Lampholder
HW 907-1 Opal 030 100/200W G.L.S.
HW 907-2 Opal 040 80/125W MB/U
HW 907-3 Opal 030 80/125W MBF/U
HW 907-4 Opal 040 45/60W SODIUM
PLEASE STATE TYPE OF BOWL AND LAMPHOLDER WHEN ORDERING



ELECO LIMITED


Sphere Works · St. Albans · Hertfordshire
Telephone: ST. ALBANS 54524/8 Telegrams: VOLTARCON ST. ALBANS