SPECIFICATION

Primarily designed for use with 2-24" 40 watt fluorescent lamps. The canopy and bowl ring are made from corrosion resistant die-cast aluminium alloy (LM6) and the lower enclosing bowl is Perspex. The lantern is closed at one end by a stainless steel toggle catch, and the joint gasketted against dirt and moisture.

The lamps, holders and control gear are mounted on an easily accessible hinged matt anodised aluminium reflector. A porcelain terminal block, earth screw and cable clamp are provided.

Quickstart gear is normally supplied, earth strip lamps must be used and the lantern must be properly earthed. Weight 16 lbs.

FIXING

Side entry only for 1" B.S.P. plain tube, minimum length 5", max 6", mounted horizontally or at any suitable angle according to the bracket supplied.

LAMPS	CATALOGUE NO.
2-40 watt or 2-20 watt	HW 727
Please state voltage and lamp watts when ordering

THE ELECO TWO

POLAR DIAGRAM BASED ON PHILIPS WARMWHITE 40 WATT LAMPS.
TOTAL INITAL OUTPUT OF 3520 LUMENS.

TEST C 34

ELECO PHOTOMETRIC LABORATORY

	ELECO LIMITED Sphere Works · St. Albans · Hertfordshire Telephone: ST. ALBANS 54524/8 Telegrams: VOLTARCON ST. ALBANS