|
ELECO-Way Post Top
For Group B and Decorative Lighting with G.L.S Lamps or 80/125W Mercury or 45/60W Sodium with Opal Perspex Bowl.
Performance
A general all-round illumination is obtained with a pleasing appearance and absence of glare.
Specification
An attractive modern style lantern which is durable, strong and lightweight.
The top is hinged and gasketted to the diffusing opal perspex bowl, and secured by two toggle clips.
The base can be supplied to fit the majority of standard spigots; it is cast in corrosion resistant aluminium alloy (LM6). This base is fitted with a
porcelain connector block, earth screw, cable clamp and supports the lampholder.
Standard finish is stove enemelled white inside and aluminium outside. Other colours in the I.C.I. range can be supplied to special order.
A choice of two grades of opalescence is available, either 030 or 040.
An outstanding feature of the perspex bowl is its single piece, deep drawn construction. The absence of seams or joints gives maximum strength and
rigidity.
Fixing
The lantern is supplied with spigot cap, either B.S. 3" x 3", or to suit the ELECOSlim columns. Location is by Allen screws.
| Catalogue Number | Spigot | Bowl | Lampholder |
|---|
| HW 877 | 3" x 3" | Opal 030 or 040 | 100/200W G.L.S. or
80/125W MB/U or
80/125W MBF/U
|
| HW 878 | ELECOSlim | Opal 030 or 040 | 100/200W G.L.S. or
80/125W MB/U or
80/125W MBF/U
|
| HW 879 | 3" x 3" | Opal 030 or 040 | 45/60W SOI |
Please state type of bowl and lampholder when ordering.
|
