S.93856A 'BEAUFORT 25'
|
Technical
Top spinning 18 S.W.G. aluminium.
Four steel supporting tubes 3/8in. in diameter.
Reflector plate 18 S.W.G. aluminium and 16 S.W.G. mild steel.
Spigot cap LM-6-M alloy, internal diameter 3 1/8in. with four Allen set screws. Earthing screw in spigot cap.
Lampholder wired to a floating terminal block in spigot cap.
Stove enamelling by the hot spray process.
External screws non-corrosive.
|
|
DESCRIPTION
Pole top fitting. 200 watt.
Spun aluminium outer hood, prime etched and glossy stove enamelled blue-grey. Reflector in two parts, the outer
being sheet aluminium and the inner disc sheet steel, both prime etched and stove enamelled white. Hood supported
by four steel tubes which are secured to a cast aluminium alloy spigot cap to suit a standard 3 in. diameter spigot.
Tubes cadmium plated, spigot cap prime etched, both stove enamelled aluminium and clear lacquered. Porcelain skirted
E.S. lampholder for 200 watt tungsten lamp, wired to a porcelain terminal block in spigot cap.
S.93880A 'BEAUFORT 20'
|
|
