WEMBLEY LANTERNS
(MADE IN ENGLAND)
F 5451/7
|
F 5441/7
|
The series of "Wembley" lanterns has been evolved as the result of many years of experience and research work. They incorporate
a number of special features for ease of maintenance and maximum efficiency. The refractors are designed to give the maximum light
output and ideal candle power distribution.
Types F 5451/7 are totally enclosed and therefore dustproof. An occasional wiping of the outer globe is all
that is generally necessary to maintain maximum illumination. The interior will only need attention in this respect at the
end of long periods and this can be done when it is necessary for the lanterns to be opened for lamp renewal purposes.
Types F 5441/7 are supplied without the outer enclosing globe, and are therefore more inexpensive models.
The "Wembley" lanterns shown above are designed to accomodate three types of G.E.C. English-made refractors, each giving a
different light distribution. A plan of the typical light distribution is given below.
G 501
Symmetric. Peak at 70°.
|
G 507
Non-axial asymmetric. Peak at 75°.
|
G 513
Axial asymmetric. Peak at 75°.
|
Plan of typical light distribution from 200-watt totally enclosed non-ventilated "Wembley"
lantern given by the new G.E.C. English-made refractors, giving approximate candle power
in peak directions at the angles from the lower vertical shown.
F 5451/7
SPECIFICATION
Heavy gauge copper body. Improved focussing device.
Accessible and rapid rotatable refractor plate for lining up with the roadway without disturbing
the joint between the bracket and lantern, and ensuring positive location of any of the three
types of refractor. Refractor secured by cadmium-plated supports and phosphor-bronze springs. G.E.C.
English-made prismatic glass refractor, giving maximum light output. Hinged steel outer reflector,
vitreous enamelled for easy cleaning. Non-ventilated outer globe of English clear heat-resisting
glass. Porcelain lampholder.
Standard tapping - ¾in. gas.
Standard finish - Green outside, all reflecting surfaces white vitreous enamelled.
F 5451 |
60-100W |
G501 symmetric |
BC* |
13½ins. |
14ins. |
9½ins. |
5lbs. |
1lbs. |
1lbs. |
£2 1s 3d |
F 5452 |
60-100W |
G507 non-axial asymmetric |
BC* |
13½ins. |
14ins. |
9½ins. |
5lbs. |
1lbs. |
1lbs. |
£2 1s 3d |
F 5453 |
60-100W |
G513 axial asymmetric |
BC* |
13½ins. |
14ins. |
9½ins. |
5lbs. |
1lbs. |
1lbs. |
£2 1s 3d |
F 5455 |
150-200W |
G501 symmetric |
ES |
13½ins. |
14ins. |
9½ins. |
5lbs. |
1lbs. |
1lbs. |
£2 1s 9d |
F 5456 |
150-200W |
G507 non-axial asymmetric |
ES |
13½ins. |
14ins. |
9½ins. |
5lbs. |
1lbs. |
1lbs. |
£2 1s 9d |
F 5457 |
150-200W |
G513 axial asymmetric |
ES |
13½ins. |
14ins. |
9½ins. |
5lbs. |
1lbs. |
1lbs. |
£2 1s 9d |
*If required with E.S. lampholders 6d. each extra.
F 5441/7
SPECIFICATION
Cast iron top, with vitreous enamelled streel reflector
below. Can be lined up with the roadway without disturbing the joint between bracket and lantern.
G.E.C. English-made prismatic glass refractor and supports as for F5451/7.
Porcelain lampholder.
Standard tapping - ¾in. gas.
Standard finish - Green outside, reflecting surface white vitreous enamelled.
F 5441 |
60-100W |
G501 symmetric |
BC* |
11ins. |
10ins. |
8ins. |
11lbs. |
1lbs. |
£1 1s 0d |
F 5442 |
60-100W |
G507 non-axial asymmetric |
BC* |
11ins. |
10ins. |
8ins. |
11lbs. |
1lbs. |
£1 1s 0d |
F 5443 |
60-100W |
G513 axial asymmetric |
BC* |
11ins. |
10ins. |
8ins. |
11lbs. |
1lbs. |
£1 1s 0d |
F 5445 |
150-200W |
G501 symmetric |
ES |
11ins. |
10ins. |
8ins. |
11lbs. |
1lbs. |
£1 1s 0d |
F 5446 |
150-200W |
G507 non-axial asymmetric |
ES |
11ins. |
10ins. |
8ins. |
11lbs. |
1lbs. |
£1 1s 0d |
F 5447 |
150-200W |
G513 axial asymmetric |
ES |
11ins. |
10ins. |
8ins. |
11lbs. |
1lbs. |
£1 1s 0d |
*If required with E.S. lampholders 6d. each extra.
|