CLEARMAIN |
|
CAT. No. |
DESCRIPTION |
OPTICAL SYSTEM |
OSRAM LAMP |
|
Z8270
Z8370
Z8470
|
The lantern body consists of two die-cast light alloy end pieces built on to a 9
in. aluminium alloy extrusion. Two sleeves are incorporated in the body to receive the bracket mounting
arm. All auxiliaries together with the wiring harness and lampholders are within the body on a detachable
die-cast aluminium gear tray. The gear is enclosed by a hinged aluminium over-reflector secured by
quick release turn buttons. The 'Perpsex' bowl is hinged to the lantern body and secured by
stainless steel spring catches. NOTE: A tapered 'Perspex' bowl can be supplied to special order. |
Two 'Perspex' refractor plates are cemented one to each inner
side of a 'Perspex' bowl. |
Z 8270 Z 8370 Z 8470 Two, three of four 5 ft. 80W fluorescent type
MCFA/U tubes respectively.
|
|
|
Z8480
|
The lantern body is essentially a 'Perspex' cylinder, through which runs a steel barrel screwed at
its lower end into a cast iron spigot cap. The lower copper spinning encloses the tube operating gear which is supplied
with the lantern. The 'Perspex' cylinder fits over this assembly. The top copper spinning is secured by a spun copper
finial. |
The opal 'Perspex' cylinder provides a diffusive symmetric light distribution. |
Four 5 ft. 80W fluorescent type MCFA/U tubes. |
|
|
Z9504
Z9506
|
1¼ in. B.S.P. plain side entry die-cast light alloy body. The inner surface of the
body is white enamelled and carries the lampholders, thermal relay and porcelain terminal block. The Z 9506 lantern
carries the lamp operating gear in the lantern body on a removable gear tray. The 'Diakon' bowl is
hinged to the lantern body and secured by two stainless steel toggle catches. |
Medium angle beam distribution. Two injection moulded Diakon refractor
plates are cemented one to each inner side of a 'Diakon' bowl. |
200W linear sodium lamp. |
|
|
Z9504 'A'
Z9506 'A'
|
1¼ in. B.S.P. plain side entry die-cast light alloy body. The inner surface of the
body is white enamelled and carries the lampholders, thermal relay and porcelain terminal block. The Z 9506 'A' lantern
carries the lamp operating gear in the lantern body on a removable gear tray. The 'Diakon' bowl is
hinged to the lantern body and secured by two stainless steel toggle catches. The lantern is intended for main road
lighting in the vicinity of airfields and falls within the specification issued by the Ministry of Transport. |
Aeroscreened distribution. Two injection moulded 'Diakon' refractor plates
are cemented one to each inner side of a 'Diakon' bowl. Screening from the air achieved by a moulded
'Perspex' box containing louvres cemented to each side of the bowl over the refractor plates. |
200W linear sodium lamp. |
|
|
Z9504 'C'
Z9506 'C'
|
1¼ in. B.S.P. plain side entry die-cast light alloy body. The inner surface of the
body is white enamelled and carries the lampholders, thermal relay and porcelain terminal block. The Z 9506 'C' lantern
carries the lamp operating gear in the lantern body on a removable gear tray. The 'Perspex' bowl is hinged to the lantern
body and secured by two stainless steel toggle catches. |
Cut-off distribution. Two anodised aluminium mirrors fixed on to each inner
side of a 'Perspex' bowl. |
200W linear sodium lamp. |
|
|
Z8420
|
1¼ in. plain side entry. Lantern body consists of a die-cast light alloy canopy and pressed
aluminium main body. Lantern canopy carries clamping bolts, porcelain termainal block and lampholder. Heat resisting flat
glass held to the main pressing. |
Cut-off distribution. Contour of main body pressing carefully designed so that
each side of body forms a long curved reflector producing the required cross-over distribution. |
250W or 400W MBF/U colour corrected mercury lamp. |
|
|
Z8426
|
1¼ in. plain side entry. Lantern body consists of a die-cast light alloy canopy and pressed
aluminium main body. Lantern canopy carries clamping bolts, porcelain termainal block and lampholder. A mounted tapered
'Perspex' dish is held to the main pressing. The dish has clear sides and ends with an opalised area below the lamp. |
Medium angle beam distribution. Contour of main body pressing carefully designed so that
each side of the body forms a long curved reflector producing the required cross-over distribution. |
250W or 400W MBF/U colour corrected mercury lamp. |
|
|
Z8427
|
1¼ in. plain side entry. Lantern body consists of a die-cast light alloy canopy and pressed
aluminium main body. Lantern canopy carries clamping bolts, porcelain termainal block and lampholder. A mounted tapered
'Perspex' dish is held to the main pressing. |
Cut-off distribution. Contour of main body pressing carefully designed so that
each side of the body forms a long curved reflector producing the required cross-over distribution. |
250W or 400W MBF/U colour corrected mercury lamp. |
|
|
Z8430
|
1¼ in. plain side entry. Light alloy die-cast body housing the reflectors, lampholder, terminal
block, wiring, lamp steady, reflector plate and universal magnetic deflector. The refractor bowl is held in a die-cast
light alloy ring hinged to the body and secured by a stainless steel toggle catch. |
Medium angle beam distribution. Pressed prismatic glass refractor bowl. |
250W or 400W MA/V lamp. |
|
|
Z8430CM
|
1¼ in. plain side entry. Light alloy die-cast body housing the reflectors, lampholder, terminal
block and wiring. The refractor bowl is held in a die-cast
light alloy ring hinged to the body and secured by a stainless steel toggle catch. |
Medium angle beam distribution. Pressed prismatic glass refractor bowl. |
250W or 400W MBF/U lamp. |
|
|
Z8401
|
1¼ in. B.S.P. tapped top entry. Light alloy die-cast body carries the terminal block,
wiring, lampholder and the reflectors which make up the optikon. The lantern is intended for main road lighting
in the vicinity of airfields and falls within the specification issued by the Ministry of Transport. |
Aeroscreened distribution. Two silvered glass mirrors held inside the body.
A pressed heat-resisting glass dish makes the lantern enclosed. |
250W or 400W MBF/U lamp. |
|
|
Z8403
|
1¼ in. B.S.P. tapped top entry. Light alloy die-cast body carries the terminal block,
wiring, lampholder and the reflectors which make up the optikon. The lantern provides a cut-of light distribution. |
Cut-off distribution. Two silvered glass mirrors held inside the body.
A pressed heat-resisting glass dish makes the lantern enclosed. |
250W or 400W MBF/U lamp. |
|
|
Z8128B
|
1¼ in. B.S.P. plain side entry die-cast light alloy body. Spring fit spun light
alloy top giving access to the interior. The lampholder is carried on a sliding bridge piece. A white enamelled flat
plate acts as an over-reflector for the lamp. A hingedring secured by a toggle catch holds the outer bowl refractor. |
Non-axial asymmetric prismatic glass bolw refractor. |
125W mercury MB/U or MBF/U lamp
or
250W or 400W MB/U or MBF/U lamp. |
|
|
Z9454
Z9455
Z9464
Z9465
|
1¼in. B.S.P. plain side entry or 1¼in. B.S.P. tapped top entry light alloy die-casting
carrying the lamp steady, lampholder and porcelain terminal block. The Z 9464/5 lantern carries the lamp operating gear in the
lantern body. The bowl is hinged to the lantern body and secured by a stainless steel spring catch. |
Medium angle beam distribution. Two injection moulded 'Diakon' refractor plates cemented
one to each inner side of a 'Diakon' bowl. |
140W integral or detachable jacket sodium lamp. |
|
|
Z9454 'A'
Z9455 'A'
Z9464 'A'
Z9465 'A'
|
1¼in. B.S.P. plain side entry or 1¼in. B.S.P. tapped top entry light alloy die-casting
carrying the lamp steady, lampholder and porcelain terminal block. The Z 9464/5 'A' lantern carries the lamp operating gear in the
lantern body. The bowl is hinged to the lantern body and secured by a stainless steel spring catch. The lantern is intended
for main road lighting in the vicinity of airfields and falls within the specification issued by the Ministry of Transport. |
Aeroscreened distribution. Two injection moulded 'Diakon' refractor plates are cemented one
to each inner side of a 'Diakon' bowl. Screening from the air is achieved by a moulded 'Perspex' box containing louvres cemented
to each side of the bowl over the refractor plates. |
140W integral or detachable jacket sodium lamp. |
|
|
Z9454 'C'
Z9455 'C'
Z9464 'C'
Z9465 'C'
|
1¼in. B.S.P. plain side entry or 1¼in. B.S.P. tapped top entry light alloy die-casting
carrying the lamp steady, lampholder and porcelain terminal block. The Z 9464/5 'C' lantern carries the lamp operating gear in the
lantern body. The bowl is hinged to the lantern body and secured by a stainless steel spring catch. |
Cut-off distribution. It comprises two anodised aluminium mirrors fixed one to each inner side of a 'Perspex' bowl. |
140W integral or detachable jacket sodium lamp. |
|