new
manufacturers
installations
collection
restorations
timeline
identification
publications
glossary
mailing list
site map
links
about
contact

This aluminium-bodied lantern can be supplied with integral control gear for two 250W or 400W high-pressure sodium SON or SON/T lamps, or for two 400W mercury halide lamps. It fits either side-entry mast arms of 60 mm o.d. or vertical-entry masts of 90-110 mm o.d.


Note: Mercury halide lamps
UK marking MBI = Philips International marking HPI


RANGE
SRP 013 + 250W SON: Lantern complete with control gear for 2 X 250W SON or SON/T lamps.
SRP 013 + 400W SON: Lantern complete with control gear for 2 X 400W SON or SON/T lamps.
SRP 013 + 400W mercury halide: Lantern complete with control gear for 2 X 400W mercury halide lamps.


APPLICATIONS
For any application where a high-mast lantern with high luminance level and good uniformity of distribution is required, such as :-

  • Main roads
  • Squares
  • Motorway interchanges


FEATURES

  • Die-cast aluminium canopy, stove enamelled white inside, grey outside for resistance to corrosion.
  • Clear acrylic bowl, sealed to canopy with gasket to render the lantern resistant to ingress by rain and dust.
  • Built-in control gear includes power factor correction capacitors.
  • All exposed ferrous parts are made from stainless steel.


Features continued
  • High-purity (99-99%) aluminium reflectors provide highly efficient lighting with good beam control.
  • Cut-off light distribution according to C.I.E. recommendations. Maximum intensity at 55°.
  • Toe-in angle 20° towards the road axis.
  • Fits side-entry mast arms of 60 mm o.d. (2 in. B.S.P.) or vertical-entry masts of 90-110 mm o.d. (3-3¼in. B.S.P.).


MATERIALS & FINISH

  • Canopy: Die-cast aluminium, stove enamelled white inside, grey outside.
  • Bowl: Clear acrylic.
  • Sealing gaskets: Neoprene close cell.
  • Bowl clips & hinges: Stainless steel.


SPECIFICATION
High-mast lantern for 250W or 400W SON or SON/T, or 400W mercury halide lamps, complete with integral control gear. Fitted with acrylic reflector bowl. Spigot entries for 60mm o.d. side-entry master arm and 90-110mm o.d. vertcial entry mast.


To specify state:
High-mast lantern with integral control gear for two 250/400W SON(T) lamps or two 400W mercury halide lamps with corrosion-resistant canopy and clear acrylic bowl. Similar to Philips SRP 013.


KEY TO ILLUSTRATION
1. Canopy
2. Reflector
3. Lampholder
4. Gasket
5. Bowl
6. Toggle
7. Capacitor
8. Ballast
9. Cover plate.




LANTERN DATA
SpecificationTotal lampLamp Lamp Total Total Windage area
Lumens VoltsCurrentCircuitWeightPlanElevation
LDL* V** A** Watts (kg) (m2)(m3)
SRP 013 + 250W SON48,0001003.0560340.450.20
SRP 013 + 250W SON/T50,0001003.0560340.450.20
SRP 013 + 400W SON90,0001054.4880370.450.20
SRP 013 + 400W SON/T93,0001054.4880370.450.20
SRP 013 + 400W MBI/H58,4001253.4848380.450.20
* After 2000 hours burning
**Per lamp


.
ORDERING DATA
Catalogue No.For lamp type
SRP 013 + 250W SON250W SON or 250W SON/T
SRP 013 + 400W SON400W SON or 400W SON/T
SRP 013 + 400W MBI/H400W MBI/H


Please order lanterns in the form given in the following example:-
50 Philips lanterns SRP 013 + 400W MBI/H
50 Philips mercury halide lamps 400W MBI/H

Note that lamps should be ordered separately.


Note:Mercury halide lamps.
UK marking MBI = Philips International marking HPI.
    Lamp: Made in Holland.
    Fitting: Made in Holland.