new
manufacturers
installations
collection
restorations
timeline
identification
publications
glossary
mailing list
site map
links
about
contact

Phosware Booklet: Wall-Mounted Gear Box And Bracket

WALL-MOUNTED GEAR BOX AND BRACKET

Construction of cast aluminium with a weathered door secured by a captive screw.

Fixing is by means of 3 bolts through the back wall of the box. At the bolt positions recesses are provided in the backboard.

Hole centres are two at the top at 3 9/16" and one at the base on the vertical centre line and 18¾" below the axis of the top holes.

The 1" BSP side entry bracket tube is secured by two 3/8" Allen screws and a 2" dia. hole is provided in the base for wiring access if required.

Exterior finish: Standard hammered metallic beige.

Length Outside dimensions Weight without gear and lantern
Width Depth Inside width at board face Backboard
Length Width
25½" 5 3/8" 4¾" 4¾" 22" 44½" 15¼"