Fittings include Lampholders All prices upon Application

Street Lighting Fittings For Tungsten Filament And Mercury Vapour or Fluorescent Discharge Lamps (For Groups 'A' and 'B' roads)

The fittings listed on this page each comprise a substantial dome (in cast iron or aluminium alloy) with sheet steel vitreous enamelled inner reflector, arranged to hinge, thereby affording easy access to the interior of the unit.

Each fitting is provided with pre-set focussing positions for the respective lamps, an easy-wiring terminal block is wired to the lampholder, which is included, and the reflector carries a patent directional lens or symmetric type refractor.

The standard finish is white enamel on reflecing surface and green or aluminium outside.

Tapped ¾in. or 1in. B.S.P. Cat. No. Diam. Material Lamp Watts *C12423 10 in. Cast Iron 60-200 Tungsten 60-125 Mercury 80 Fluorescent *C12423/AL 10 in. Alum. Alloy 60-200 Tungsten 60-125 Mercury 80 Fluorescent Tapped 1in. or 1¼in. B.S.P. C12603 14 in. Cast Iron 300-500 Tungsten C12603/AL 14 in. Cast Iron 300-500 Tungsten

The fittings listed below are similar in all respects to the above, but incorporate a 14in. diameter cast reflector which is integral with the dome. Tapped ¾in. or 1in. B.S.P. Cat. No. Material Lamp Watts *C13222 Cast Iron 60-200 Tungsten 60-125 Mercury 80 Fluorescent *C13222/AL Alum. Alloy 60-200 Tungsten 60-125 Mercury 80 Fluorescent C13222 can be supplied with the reflector in vitreous enamelled finish. All fittings marked * can be supplied with REVO Patent "Kleen-Prism" Dome Refractors. Spare Refractors C12423, C12423/AL, C13222, C13222/AL: G110 (Symmetric), G226 (Directional) C12603, C12603/AL: G111 (Symmetric), G133 (Directional)