Street Lighting Fittings For Tungsten Filament And Mercury Vapour or Fluorescent Discharge Lamps (For Group 'B' roads) This lantern comprises a die-cast aluminium dome with an inner reflector of vitreous enamelled sheet steel. The reflector is hinged to give easy access to the interior of the lantern. The outer glass is supported by, and retained in, a die-cast aluminium alloy ring with his attached ot the dome by toggle action fasteners of stainless steel. Pre-set focusing is provided for 60, 100, 150 and 200 watt Tungsten Filament lamps, and 80 and 125 watt Mercury Vapour and Fluorescent Mercury Vapour lamps. The reflector carries the patent directional lens or symmetric type dome refractor. This series also includes a similar design, but with bowl type refractor instead of dome refractor and clear outer globe; also an open type unit with dome refractor only. For the latter the REVO patent "kleen-prism" dome refractor, in which all the prisms are sealed with a plain glass cover to facilitate maintenance, may be supplied as an alternative. Cat. No. Lamp Watts Entry Type C14403/T 60-200 Tungsten Top Open C14403/S 60-200 Tungsten Side Open C14404/T 80-125 Mercury Top Open C14404/S 80-125 Mercury Side Open C14407/T 60-200 Tungsten Top Enclosed C14407/S 60-200 Tungsten Side Enclosed C14408/T 80-125 Mercury Top Enclosed C14408/S 80-125 Mercury Side Enclosed C14409/T 60-200 Tungsten Top Enclosed Bowl Refractor C14409/S 60-200 Tungsten Side Enclosed Bowl Refractor C14410/T 80-125 Mercury Top Enclosed Bowl Refractor C14410/S 80-125 Mercury Side Enclosed Bowl Refractor (Top entry tapped ¾" or 1" B.S.P. Side entry 1" B.S.P. Plain Barrel) Two views of C14407 showing hinged bowl and inner refractor.

Back to REVO Electric Lighting Equipment