new
manufacturers
installations
collection
restorations
timeline
identification
publications
glossary
mailing list
site map
links
about
contact

Street Lighting Fittings
For Tubular Fluorescent Lamps
(For Groups 'A' roads)






This street lighting range offers a choice of fittings for 5ft. 80 watt Fluorescent lamps - the fittings being adaptable for mounting singly or in pairs, and either horizontally or with a 15 degrees uplift.

The fitting can house 2, 3 or 4 lamps and is enclosed by a one-piece clear Perspex envelope. This envelope is secured to a cast aluminium body by means of a captive knurled screw. A special gasket is provided between the envelope and the body which forms a efficient waterproof and dustproof seal.

Accurate light control is achieved by means of electro-brightened anodised aluminium reflectors.

The control gear for the lamps is housed within the fitting and access to the interior is obtained by releasing the knurled screw and sliding back the envelope. To facilitate servicing, the envelope slides back on rollers and a spring stop is provided to retain it in a convenient position for maintenance. For complete withdrawl, the envelope can be released by a slight depression of the spring.

Cast iron spigots in a hammered grey finish provide the required angled connections to the columns.

Weight of 3-lamp fitting complete with control gear but without spigot - 65 lbs.



Cat. No. Lamps Mounting Angle
C15075 2-5 ft. 80 watt Horizontal
C15076 3-5 ft. 80 watt Horizontal
C15086 4-5 ft. 80 watt Horizontal
C15077 2-5 ft. 80 watt 15o uplift
C15078 3-5 ft. 80 watt 15o uplift
C15088 4-5 ft. 80 watt 15o uplift

When ordering please state whether single or double arm installations are required.