Lamps
One 140W or 200W SLI/H sodium discharge lamp.
Distribution
Cut-off DLOR 65% 140W
Cut-off DLOR 77% 200W
Specification
To B.S.1788. Kite marked, DOE and COID approved.
The canopy is GRP and the bowl is UV stabilized acrylic. End supports are LM6-M
aluminium alloy, the cover for the geared version being Polypropylene.
The control gear for 'less gear' lanterns is mounted remote.
|
Mounting
Side entry for 42 x 100mm / 1.649 x 3.9in spigot.
Recommended mounting height: 10-12m / 32.8-39ft.
Recommended spacing/height ratio: 3:1.
Catalogue no.
Complete lanterns less gear
Lanterns comprise canopy assembly and bowl.
QA6 D/1140 for 140W SLI/H lamp.
QA6 D/1200 for 200W SLI/H lamp.
Complete lanterns with gear
Lanterns comprise canopy assembly (with gear) and bowl.
QA6 D/B1140.4 for 140W SLI/H lamp.
QA6 D/B1200.T for 200W SLI/H lamp.
|
Packages
QA6 1140: Canopy/end support assembly for 140W SLI/H ('less gear' version).
QA6 1200: Canopy/end support assembly for 200W SLI/H ('less gear' version).
QA6 B1140.4: Canopy/end support assembly (with gear for 140W SLI/H).
QA6 B1200.T: Canopy/end support assembly (with gear for 200W SLI/H).
QA6 D: Bowl assembly.
Control gear
Gear sets required for 'less gear'lanterns, and supplied for 'with gear' lanterns.
| Lamp | Control Gear |
| 140W SLI/H | AME 53232.4
AME C2218 |
| 200W SLI/H | AME 53261.T
AME C2355 |
|
