Lamps
a) One 100W, 150W or 200W GLS tungsten filament lamps.
b) One 80W or 125W MBF/U lamp.
Specification
To BS. 1788.
The canopy is an aluminium pressing and both gear slipper and support castings are LM6-M aluminium alloy. The bowls are
either Pinspot acrylic or CAB anti-vandal plastic. Control gear for 'less gear' lanterns is moutned remote.
|
Mounting
Side entry for 34 x 80mm spigot.
Recommended mounting height: nominal 5m.
Average spacing/height ratio: 6:1.
Catalogue no.
Complete lantern less gear
Lanterns comprise a canopy assembly, bowl assembly and a lampholder.
QB9 M/1200/B22-3: Lantern with acrylic bowl for 80/125W MBF/U.
QB9 M/1200/E27: Lantern with acrylic bowl for 80/125W MBF/U or 150/200W GLS.
QB9 M/1200/B22: Lantern with acrylic bowl for 100/200W GLS.
QB9 V/1200/B22-3: Lantern with vandal bowl for 80/125W MBF/U.
QB9 V/1200/E27: Lantern with vandal bowl for 80/125W MBF/U or 150/200W GLS.
QB9 V/1200/B22: Lantern with vandal bowl for 100/150W GLS.
|
Catalogue no.
Complete lantern with gear
Lanterns comprise a canopy assembly and a bowl-assembly. (3BC lampholder is standard).
QB9 M/B1125.T: Lantern with acrylic bowl for 125W MBF/U.
QB9 V/B1125.T: Lantern with anti-vandal bowl for 125W MBF/U.
Packages
QB9 1200: Canopy assembly (less gear).
QB9 B1125.T: Canopy assembly (with 125W gear).
QB9 M: Bowl assembly (acrylic).
QB9 V: Bowl assebmly (CAB anti-vandal).
AMEL 1085 2BC lampholder (B22).
AMEL 1086 3BC lampholder (B22-3).
AMEL 1087 ES lampholder (E27).
Control gear
Gear sets required for 'less gear' lanterns and suppleid for 'with gear' lanters..
Lamp | Control Gear |
80W MBF/U (less gear only) | AME 53162.4 AME C2234 |
125W MBF/U (less gear only) | AME 53194.4 AME C2234 |
125W MBF/U (with gear) | AME 53271.T AME C2222 |
|