Lamps
a) Two or three 500W GLS tungsten filament lamps.
b) Two or three 250W or 400W MFB/U lamps.
c) Two or three 250W or 400W SON lamps.
d) Two or three 400W MBI/F lamps.
e) Three 140W or 200W SLI/H lamps.
f) Three 135W SOX lamps.
Specification
COID approved.
The canopy of sheet aluminium is attached to the base casting assembly of LM6-M aluminium alloy by a steel stem.
The bowl is of acyrlic plastic.
Auxiliary reflectors are of aluminium alloy.
Control gear is mounted remote.
Mounting
Post top mounting for 76 x 130mm spigot.
Recommended mounting height: 8m for 3ft lantern.
Recommended mounting height: 10m for 4ft lantern.
Recommended spacing/height ratio: 3:1.
Catalogue no.
Complete 3ft fittings
Lantern comprise a stem assembly, canopy and bowl.
QG4 O/F500 for 2-500W GLS, 250/400W MBF/U, 250/400W SON and 400W MBI/F.
QG4 O/F400 for 3-500W GLS, 250/400W MBF/U, 250/400W SON and 400W MBI/F.
QG4 A/M/F/2500 for 2-500W GLS, 250/400W MFB/U, 250/400W SON and 400W MBF/F.
|
Packages for 3ft Fittings
QG4 2500: Stem assembly (2 lamps).
QG4 3400: Stem assembly (3 lamps).
QG4 F: Canopy assembly (3ft).
QG4 O.36: Opal bowl (3ft).
QG4 M.36: Pinspot bowl (3ft).
QG4 A: Auxiliary reflector.
Complete 4ft fittings
QG4 O/W/3135 for 3x135W SOX.
QG4 O/W/3200 for 3x200W SLI/H.
QG4 O/W/3400 for 3x250/400W MBF/U, 250/400W SON and 400W MBI/F.
Packages for 4ft Fittings
QG4 W3135: Stem assembly for 3-135W SOX.
QG4 W3200: Stem assembly for 3-200W SLI/H.
QG4 W3400: Stem assembly for 3-250W/400W MBF/U, 250/400W SON and 400W MBI/F.
QG4 O: Opal bowl (4ft).
QG4 W: Canopy assembly (4ft).
|
Control gear
Gear sets required for discharge lamps in lanterns.
Lamp | Control Gear |
135W SOX | AME 53166.T AME C2281 |
140W SLI/H | AME 53232.4 AME C2218 |
200W SLI/H | AME 53172.T AME C2235 |
250W MBF/U | AME 53198.4 AME C2214 |
400W MBF/U | AME 53193.4 AME C2218 |
400W MBI/F | AME 53193.T AME 53262 AME C2218 |
250W SON | AME 53251.T AME 53262 AME C2235 |
400W SON | AME 53230.T AME 53262 AME C2218 |
|