CLEARSIDE |
|
CAT. No. |
DESCRIPTION |
OPTICAL SYSTEM |
OSRAM LAMP |
|
Z5350
Z5351
Z5352
|
¾ in. B.S.P. tapped top entry die-cast aluminium alloy body. A plain white enamelled reflector
plate is held to the lantern body by stainless steel screws. A movable bridge-piece is carried on
lugs within the lantern and provides focussing adjustment. |
White enamelled reflector plate |
60-200W pearl tungsten filament lamp. B.C. or E.S. cap.
or
80W or 125W mercury MB/U or MBF/U lamp 3/BC cap.
|
|
|
Z5354
Z5355
Z5356
|
¾ in. B.S.P. tapped top entry die-cast aluminium alloy body. A white enamelled reflector
plate is held to the lantern body by stainless steel screws and carries the dome refractor. A movable bridge-piece is carried on
lugs within the lantern and provides focussing adjustment. |
Prismatic glass dome refractor. Symmetric or non-axial asymmetric or axial asymmetric. |
60-200W pearl tungsten filament lamp. B.C. or E.S. cap.
or
80W or 125W mercury MB/U or MBF/U lamp 3/BC cap.
|
|
|
Z5580
Z5581
Z5582
|
¾ in. B.S.P. tapped top entry die-cast aluminium alloy body. A hinged ring secured by a toggle catch
holds the outer bowl in use. A moveable bridge-piece is carried on lugs within the lantern and
provides focussing adjustment. |
Axial asymmetric glass bowl refractors
or
Four beam distribution bowl refractor
or
Non-axial asymmetric 'Diakon' bowl refractor
or
A range of diffusing bowls. |
60-200W pearl tungsten filament lamp. B.C. or E.S. cap.
or
80W or 125W mercury MB/U or MBF/U lamp 3/BC cap
or
45W sodium lamp.
|
|
|
Z5590
Z5591
Z5592
Z5598
Z5599
|
¾ in. B.S.P. tapped top entry die-cast aluminium alloy body. A hinged ring secured by a toggle catch
holds the outer bowl in use. A white enamelled refractor plate is held to the lantern body by
stainless steel screws and carries the dome refractor. A moveable bridge-piece is carried on lugs
within the lantern and provides focussing adjustment. |
Prismatic glass dome refractor. Symmetric or non-axial asyymertric or axial-asymmetric. With clear
glass or 'Diakon' or unbreakable polycarbonate or rimpled glass or 'Perspex' outer globe or a range
of prismatic glass bowl refractors including a four beam distribution bowl. |
60-200W pearl tungsten filament lamp. B.C. or E.S. cap.
or
80W or 125W mercury MB/U or MBF/U lamp 3/BC cap
or
45W sodium lamp.
|
|
|
Z5670
Z5671
Z5672
Z5678
Z5679
|
The body consists of a truncated moulded 'Diakon' cone held between a cast aluminium base incorporating the
3" x 3" spigot cap and a die-cast light alloy upper rim and hinged top canopy. The dome refractor is held to a supporting plate sliding
on rods screwed into the top canopy. |
Prismatic glass dome refractor. Symmetric
or
non-axial asymmetric
or
axial asymmetric. |
60-200W pearl tungsten filament lamp. B.C. or E.S. cap.
or
80W or 125W mercury MB/U or MBF/U lamp 3/BC cap
or
45W or 60W sodium lamp.
|
|
|
Z8490
Z8491
Z8492
Z8495
Z8496
Z8497
|
1" B.S.P. plain side entry die-cast light alloy body. In the
Z 8490 series the mounting angle and bowl is horizontal. In the
Z 8495 series the mounting angle is horizontal and the bowl is canted up 15° a hinged
ring secured by a toggle catch holds the outer bowl. |
Presed prismatic glass bowl refractor. |
60-200W pearl or 'Silverlight' tungsten filament lamp, B.C. or E.S. cap.
or
80W or 125W mercury MB/U or MBF/U lamp, 3/BC cap.
|
|
|
Z8254
Z8255
|
1¼ in. B.S.P. plain side entry, or 1¼" B.S.P. tapped top
entry, die-cast light alloy body. The tube operating gear is fitted to a removable tray in the
body. The enclosing bowl is held to the lantern body by stainless steel toggle clips and
toggle hinges. |
Two 'Perspex' refractor plates cemented one to each inner side of a 'Perspex' bowl. |
Two 2 ft. 40W fluorescent type MCFA/U tubes. |
|
|
Z8256
|
1¼" B.S.P. plain side entry die-cast light alloy body. The tube
operating gear is fitted to a removable tray in the body. The tapered enclosing bowl is held to
the lantern body by stainless steel toggled clips and toggle hinges. |
Two 'Perspex' refractor plates cemented one to each inner side of a 'Perspex' bowl. |
Two 2 ft. 40W fluorescent type MCFA/U tubes. |
|
|
Z8260
|
1" B.S.P. plain side entry die-cast light alloy body housing the control
gear, lampholder supports and wiring harness. The 'Perspex' enclosing bowl is hinged to the body
and secured by two stainless steel catches. |
'Perspex' enclosing bowl. |
Two 2 ft. 20W or 40W fluorescent type MCFA/U tubes. |
|
|
Z8905
Z8906
Z8907
|
1" B.S.P. plain side entry die-cast light alloy body. The body carries the
tube operating gear and tube holder supports. The 'Diakon' bowl is hinged to the lantern body
and secured by two stainelss steel toggle catches. |
Two 'Diakon' refractor plates cemented one to each inner side
of a 'Diakon' bowl. |
One, two or three 3 ft. 30W fluorescent type MCFA/U tubes respectively. |
|
|
Z9480
Z9481
|
1" B.S.P. plain side entry or ¾" B.S.P. tapped top entry die-cast light
alloy body. The Z9490/1 lanterns carry the lamp operating gear within the body. The
bowl is hinged to the body and secured by stainless steel spring catch. |
Two 'Diakon' injection moulded refractor plates cemented one
to each inner side of a 'Diakon' bowl. |
45W or 60W integral or detachable jacket sodium lamp. |
|
|
Z9480 'A'
Z9481 'A'
Z9490 'A'
Z9491 'A'
|
1" B.S.P. plain side entry or ¾" B.S.P. tapped top entry die-cast light
alloy body. The Z9490/1 'A' lanterns carry the lamp operating gear within the body. The
bowl is hinged to the body and secured by stainless steel spring catch. The lantern is intended
for side road lighting in the vicinity of airfields. |
Aeroscreened distribution. Two 'Diakon' injection moulded
refractor plates cemented one to each inner side of a 'Diakon' bowl. Screening from the air is
achieved by a moulded 'Perspex' box containing louvres being cemented on each side of the bowl
over the refractor plates. |
45W or 60W integral or detachable jacket sodium lamp. |
|
|
Z9480 'C'
Z9481 'C'
|
1" B.S.P. plain side entry or ¾" B.S.P. tapped top entry die-cast light
alloy body. The Z9490/1 'C' lanterns carry the lamp operating gear within the body. The
bowl is hinged to the body and secured by stainless steel spring catch. |
Cut-off distribution. Two-anodised aluminium refractors fixed
one to each inner side of a 'Perspex' bowl. |
45W or 60W integral or detachable jacket sodium lamp. |
|
|
Z9494
Z9495
|
1" B.S.P. plain side entry die-cast light alloy body. The 'Perspex' enclosing
bowl is hinged to the body with a removable stainless steel hinge pin. The bowl is secured by
a stainless steel latch. |
Two 'Perspex' refractor plates cemented one to each inner
side of a 'Perspex' bowl. |
60W linear sodium lamp. |
|