The lantern is designed for Group B8 installations at a height of 8 meters as defined in B.S.C.P. 1004; Part 2: 1974. It complies with B.S. 1788, is kite marked and D.O.T. accepted.

Top entry mounting socket is threaded 1¼" B.S.P. Die cast aluminium body housing the lamp operating gear. Injection moulded acrylic or anti-vandal U.V. stabilised polycarbonate refractor bowl.

The lantern is designed for Group A lighting at a mounting height of 8, 10 or 12 meters.

Side entry mounting sockets accepts a 100mm long spigot 42mm in diameter.

Die cast aluminium body. Optical control is obtained with a heat resisting pressed prismatic glass refractor bowl combined with an anodised aluminium over-reflector.

The lantern is designed for Group A lighting at a mounting height of 8 or 10 meters.

Side entry mounting socket accepts a 914mm long spigot 60.3mm in diameter.

Aluminium alloy extruded body with die-cast light alloy end-pieces. Body houses the lamp operating gear.

Optical control is obtained by an acrylic refractor enclosing bowl.

The lantern is for lighting traffic routes to BS 5489.

For mounting heights up to 10 meters the 250W SON, 250W or 400W MBF/U lamp can be used. For 12 meters the 400W SON is required. It complies with BS 1788, is kite marked and D.O.T. accepted.

Side entry moutning socket accepts a 125mm long spigot 42mm in diameter. Pressed aluminium reflector optic, polished and anodised. Die cast aluminium end support complete with lamp operating gear.

The lantern is enclosed by a hinged flat glass plate.

The lantern is for lighting traffic routes to BS 5489.

For mounting heights up to 10 meters the 250W SON, 250W or 400W MBF/U lamp can be used. For 12 meters the 400W SON is required. It complies with BS 1788, is kite marked and D.O.T. accepted.

Side entry moutning socket accepts a 125mm long spigot 42mm in diameter. Pressed aluminium reflector optic, polished and anodised. Die cast aluminium end support complete with lamp operating gear.

The lantern is enclosed by a hinged injection moulded Diakon bowl.

The lantern is designed for Group A lighting at a moutning height of 8, 10 or 12 meters.,P> Side entry mouting socket accepts a 100mm long sipogt 42mm in diameter. Die-cast aluminium body housing the lamp operating gear. Optical control is obtained with a heat resisting pressed prismatic glass refractor bowl combined with an anodised aluminium over-reflector.

The lantenr is designed for Group B8 installations at a mounting height of 8 meters as defined in B.S.C.P. 1004: Part 2: 1974. It compiles with B.S. 1788, is kite marked and D.O.T. accepted.

Side entry mounting socket accepts a 125mm long spigot 42mm in diameter. Die cast aluminium body with an injection moulded acyrlic or anti-vandal U.V. stablised polycarbonate refractor bowl.

The lantern is designed for Group A10 installations at a mounting height of 10 meters as defined in B.S.C.P. 1004: Part 2: 1974. It compiles with B.S. 4533: Part 2: Section 2.7: 1976, is kite marked and D.O.T. accepted.

Side entry mounting socket accepts a 125mm long spigot 42mm in diameter. The body is moulded in S.M.C. glass reinforced polyester, with an injection moulded acrylic refractor bowl.

The lantern is designed for Group A12 installations at a mounting height of 12 meters as defined in B.S.C.P. 1004: Part 2: 1974. It compiles with B.S. 1788, is kite marked and D.O.T. accepted.

Side entry mounting socket accepts a 125mm long spigot 42mm in diameter. Die cast aluminium body with a moulded acrylic refractor bowl.

Z9545 is designed for Group B8 installations at a mounting height of 8 meters.
Z9555 is designed for Group A10 installations at a mounting height of 10 meters.
Z9565 is designed for Group A12 installations at a mounting height of 12 meters.

As defined in B.S.C.P. 1004:Part 2:1974. All comply with B.S. 1788, are kit marked and D.O.T. accepted.

Side entry mounting socket accepts a 125mm long spigot 42mm in diameter. The body is made of heavy guage aluminium sheet reinforced at the mounting socket with a formed steel bracket.

Optical control is obtained with brigtened and anodised reflectors. The lantern is enclosed by a clear mounlded acrylic bowl.

Z9543 is designed for a mounting height of 8 meters.
Z9553 is designed for Group A10 installations at a mounting height of 10 meters.
Z9563 is designed for Group A12 installations at a mounting height of 12 meters.

The lanterns comply in all respects with the requirements of B.S. 4533:Part 2:Section 2.7:1976, are kite marked and D.O.T. accepted.

The lanterns have a high downward light output ratio of up to 73%.

Side entry mounting accepts a 100mm or 125mm long spigot 42mm in diameter. The lantern is locked to the spigot by two substantial steel saddles.

The body is made of heavy guage aluminium and a formed steel reinforcing bracket is through bolted to the die-cast integral gear compartment.

Optical control is obtained with brightened and anodised facetted reflectors. The lantern is enclosed by a clear moulded acrylic bowl.

The lantern is designed for catenary mounting at a height of 12 meters, spaced at 11.25 metre centres with eight lanterns per 90 metre span. The lantern has a high downward light output ratio of 73%.

The body is made from heavy guage aluminium with formed steel reinforcing brackets at the catenary mounting points.

Optical control is obtained with brigtened and anodised reflectors. The lantern is enclosed by a clear mounlded acrylic bowl.