Phosware Conical Lanterns
Top Post And Pendant For Group "B" Street Lighting
P 107A
|
P 103A
|
Phosware Conical Lanterns for Group "B" lighting are made in two types:-
Post Top for mounting on to the spigot of the column and -
Pendant for suspending from the column bracket.
Nos. P102A, P103A, P107A and P108A willaccommodate GLS lamps up to 200W, MB/U and MBF/U mercury lamps up to 125W and also
45-60W Sodium lamps.
The Post Top type is arranged witha cast alum-alloy Spigot Cap, a seamless diffused Perspex Cone 11½" dia at
top, 8" dia at bottom and 14" deep, which is clamped to the spigot cap by means of an internal frame and aluminium top spinning
with an ornamental screw knob.
The Perspex cone is fixed to the hood spinning and the ornamental fixing screw is also made captive in the hood spinning so that the
whole exterior assembly is detachable in one piece for ease of maintenance which, also gives complete accessibility to the
interior for adjustment of refractor, cleaning and lamp replacement.
The Pendant type is fixed direct to the column bracket from the top and instead of a cast metal base the Perspex
cone is made with a curved opal base forming a complete conical shaped bowl, which is removable from the base.
The interior forms a strong metal support for the lantern independant of the Perspex cone, which consists of two cast spiders koined
togetehr by metal tubes, which carry the wiring and also an adjustable cast slider to which is fixed a two-way non-axial prismatic
refractor for light control.
P 108A
|
P 102A
|
Initial Lamp lumens |
1200 |
2090 |
2880 |
3000 |
5300 |
2610 |
4020 |
Average output throughout life |
1160 |
1970 |
2725 |
2350 |
3900 |
2250 |
3420 |
Average output of lantern throughout life of lamp |
870 |
1480 |
2040 |
1760 |
2920 |
1690 |
2570 |
Light output ratio |
75% |
Proportion in lower hemisphere |
88% |
Directional intensity ratio |
1.9 |
P.102A |
Pendant |
100-150 GLS or 80 MB/U or MBU/F or 45-60 SO |
19 |
14½ |
8½ |
- |
¾ BSP |
7 |
P.103A |
19 |
24 |
8½ |
- |
9¼ |
P.107A |
Post-top |
100-150 GLS or 80 MB/U or MBU/F or 45-60 SO |
22 |
24 |
8½ |
3 |
- |
12¾ |
P.108A |
22 |
14½ |
8½ |
3 |
- |
10½ |
Standard finish: Exterior Hammered Metallic Beige. Interior, White Enamelled.
Post Top Lantern
For 2ft Fluroescent LampsFor Group "B" Street Lighting
P 140A
Phosware P140A vertical type Post-Top lantern is designed for use with 2-2ft or 4-2 ft. 40 watt fluorescent tubular lamps.
The 2-2ft. type is designed for side of road lighting and is arranged to give a non-axial two-way light distribution by means
of specially formed reflectors of high purity anodised aluminium sheet metal.
The lantern body consists of a cast aluminium spigot cap, a one-piece Perspex Cone and a 24 inch diameter aluminium hood.
The complete assembly is fixed by means of a centre tube of 1 in. BSP, which tube also carries the Control Gear so that the lantern is
self-contained.
P140A |
Post-Top |
2-40W 4-40W |
3 |
32½ |
24 |
9½ |
25 lbs 32½ lbs |
Polar Distribution Curve OF Phosware P108A With 150W GLS Lamp Plotted To Lamp Output 2090 Lumens
Polar Distribution Curve OF Phosware P140A 2-2ft 40W 2-Way Non-Axial Post-Top Fluorescent Type
Curve "A" - One lobe through 10o from road axis.
Curve "B" - Between the two lamps i.e. direction across road.
Curve "C" - Plan through 80o Cone from downward vertical.
|