SPECIFICATION

This lantern has a one-piece die-cast body and a die-cast bowl ring secured by stainless steel toggle clips. Both castings are of corrosion resisting aluminium alloy LM6.

A glass dome type dome refractor is fitted and held securely in the correct position by means of clips with totally enclosed springs. The lampholder bridge piece, which can be reversed to give alternative lamp positions has slotted ends for easy wiring and assembly. A clear perspex bowl sealed against ingress of moisture or dust protects the lamp and refractor. Weight 5½ lbs. It compiles with B.S. 1788/1951.

PERFORMANCE

Refractors can be supplied to give symetrical or asymetrical light distributions.

FIXING

Top entry ¾" B.S.P. with locking screw.

CATALOGUE NUMBER	LAMP	LUMENS PER 100FT. LINEAR		LIGHT OUTPUT RATIO	% IN LOWER HEMISPHERE
		120FT. SPACING	140FT. SPACING
HW.852	100W T.F.	640	550	72%	89%
	150W T.F.	1090	935		89%
	200W T.F.	1500	1300		89%
	80W MB/U	1250	1080		86%
	125W MB/U	2130	1830		86%

THE 'WARE' MKIII

BASED ON INITIAL OUTPUT FROM 200 WATT T.F. LAMP.

ELECO PHOTOMETIC LABORATORY

ELE(H) 7/59	ELECO LIMITED Sphere Works · St. Albans · Hertfordshire Telephone: ST. ALBANS 54524/8 Telegrams: VOLTARCON ST. ALBANS