|
"Beatark" Fittings
This type is designed for cases in which wide diffusion of light is required rather
than concentrated deflection.
It consists of a Curved Reflector of Polished Aluminium, heavily lacquered, covered
by a spun zinc top. Provision for the lampholder or holders is made inside the fitting,
so that only the lamp itself projects through the Reflector. This design gives the maximum
of reflected light with the minimum shadow.
A White Enamelled Reflector can be supplied at the same price if preferred.
Anti-vibration suspension for the lamps can be provided inside the Lantern at an
extra cost of 10 shillings. This fitting can be supported by a central tube,
and the lamps clustered around it, this doing away with a bracket. It is made in
three sizes. Prices for larger sizes on application. Nos. 51 and 52 are suitable
for a cluster of lamps, or any reasonable number and size, round the centre core.
The numbers shown below are therefore merely suggestions.
|
|
50
|
52
|
Souffert |
50 |
12" |
One Lamp, any size |
Green and Gold Polished Aluminium Reflector |
6/6 |
Souhait |
51 |
18" |
One Lamp, any size |
Green and Gold Polished Aluminium Reflector |
15/- |
Soujee |
51 |
18" |
or Seven 50 c.p. |
Green and Gold Polished Aluminium Reflector |
15/- |
Soulevons |
52 |
24" |
One Lamp, any size |
Green and Gold Polished Aluminium Reflector |
30/- |
Souligne |
52 |
24" |
or Seven 100 c.p. |
Green and Gold Polished Aluminium Reflector |
30/- |
|